What are P2.5 ED displays? What are its advantages and characteristics? 


What are P2.5 ED displays? 

 The P represents the pixel pitch, which refers to the center distance between two adjacent lamp beads on the LED display. For example, the pitch of the p2.5 LED display is 2.5mm, the pixel of P3 LED display is 3mm, and the pixel of P4 LED display is 4mm. The lower the pixel density, the clearer the display effect, and the price cost will increase accordingly.

The P2.5 LED display has good balance and can cover more than 75% of the colors of the naked eye, up to more than 16 million colors; the high ratio and high refresh rate ensure that there is no delay when presenting images.

Basic parameter

  • SMD surface mount 2121 lamp beads
  • 160,000 dots per square meter
  • Pixel pitch 2.5mm
  • The scanning 16 scans
  • About 500 watts per square meter

P2.5 LED display pixel composition

 For indoor SMD LED display, each pixel is red, green, and blue, each with a wick. The pixel pitch is the basis for model differentiation, which directly determines the pixel resolution that a single square meter of LED display can accommodate.

The pitch of the P2.5 LED display is 0.5mm smaller than the P3 LED display and the pixels of the p2.5 LED display have increased by more than 50,000 points.

The dot pitch of P2.5 LED screen reflects the pixel density from the distance between two pixels. The dot pitch and pixel density are the physical properties of the LED screen; the information capacity is the quantitative unit of the information carrying capacity displayed by the pixel density per unit area.

The smaller the dot pitch, the higher the pixel density, the more information capacity can be displayed per unit area, and the closer the viewing distance. on the contrary, the larger the dot pitch, the lower the pixel density, the smaller the information capacity that can be displayed per unit area, and the longer the viewing distance.

What are the characteristics of P2.5 LED display?

If P2.5 LED display is made of high-quality materials and IC chips, which are noise-free and have low power consumption. They can be used in the temperature range of 0℃~55℃.

The P2.5 LED display has high-precision dimensions. The design deviation of the collective shape and size between the cabinets is only 0.02 mm. Therefore, the size of the unit cabinets is almost the same. After assembly, the gaps are even and the entire screen is very flat and the effect is good.

If The p2.5 LED display adopts high-end configuration, with stable performance, good flatness and seamless splicing.

What are the applications of P2.5 LED display?

 P2.5 LED display screen has a wide range of applications, and you can often see them in the following occasions:

  • shopping malls
  • enterprises and institutions
  • exhibition halls
  • reception halls
  • banquet halls
  • conference room
  • Auditoriums
  • large entertainment plazas, etc

Leading P2.5 LED display from Doitvision

 R500 Series P2.5 LED Display For 3D XR Wall

Features:

  • Pixel pitch: 1.5mm, 1.9mm, 2.3mm
  • Curve installation
  • Up to 7680Hz super high refresh rate
  • Support 3D XR wall

Brick Series P2.5 LED Display For Indoor

Features:

  • Flexible screen size: Standard panel size: 500×1000 mm / 500×250 mm
  • Full range of pixel pitch:1.5mm / 1.8mm,2.6mm / 2.9mm / 3.9mm
  • 100% front service, bracket free
  • Smart mechanical design
  • Creative shapes

GOB P2.5 LED Display For Outdoor

Features:

  • Pixel pitch: 1.5mm, 1.8mm, 2.5mm
  • GOB Technology Outdoor
  • 5000:1 high contrast ratio
  • 100% front service

Conclusion:

The above is a guide about what is a P2.5 LED display. P2.5 LED displays are commonly used for indoor applications, but with the advancement of technology, the demand for outdoor high-definition displays has increased. Doit Vision have also developed GOB P2.5 LED displays for outdoor use. We hope this technical knowledge will help you. If you want to buy LED display screens, you can directly contact us.

What are P2.5 ED displays? What are its advantages and characteristics?

 

What are P2.5 ED displays? 

 

The P represents the pixel pitch, which refers to the center distance between two adjacent lamp beads on the LED display. For example, the pitch of the p2.5 LED display is 2.5mm, the pixel of P3 LED display is 3mm, and the pixel of P4 LED display is 4mm. The lower the pixel density, the clearer the display effect, and the price cost will increase accordingly.

 

The P2.5 LED display has good balance and can cover more than 75% of the colors of the naked eye, up to more than 16 million colors; the high ratio and high refresh rate ensure that there is no delay when presenting images.

 

Basic parameter

  • SMD surface mount 2121 lamp beads
  • 160,000 dots per square meter
  • Pixel pitch 2.5mm
  • The scanning 16 scans
  • About 500 watts per square meter

 

P2.5 LED display pixel composition

 

For indoor SMD LED display, each pixel is red, green, and blue, each with a wick. The pixel pitch is the basis for model differentiation, which directly determines the pixel resolution that a single square meter of LED display can accommodate.

 

The pitch of the P2.5 LED display is 0.5mm smaller than the P3 LED display and the pixels of the p2.5 LED display have increased by more than 50,000 points.

 

The dot pitch of P2.5 LED screen reflects the pixel density from the distance between two pixels. The dot pitch and pixel density are the physical properties of the LED screen; the information capacity is the quantitative unit of the information carrying capacity displayed by the pixel density per unit area.

 

The smaller the dot pitch, the higher the pixel density, the more information capacity can be displayed per unit area, and the closer the viewing distance. on the contrary, the larger the dot pitch, the lower the pixel density, the smaller the information capacity that can be displayed per unit area, and the longer the viewing distance.

 

 

What are the characteristics of P2.5 LED display?

If P2.5 LED display is made of high-quality materials and IC chips, which are noise-free and have low power consumption. They can be used in the temperature range of 0℃~55℃.

 

The P2.5 LED display has high-precision dimensions. The design deviation of the collective shape and size between the cabinets is only 0.02 mm. Therefore, the size of the unit cabinets is almost the same. After assembly, the gaps are even and the entire screen is very flat and the effect is good.

 

If The p2.5 LED display adopts high-end configuration, with stable performance, good flatness and seamless splicing.

 

What are the applications of P2.5 LED display?

 

P2.5 LED display screen has a wide range of applications, and you can often see them in the following occasions:

  • shopping malls
  • enterprises and institutions
  • exhibition halls
  • reception halls
  • banquet halls
  • conference room
  • Auditoriums
  • large entertainment plazas, etc

Leading P2.5 LED display from Doitvision

 

R500 Series P2.5 LED Display For 3D XR Wall

Features:

  • Pixel pitch: 1.5mm, 1.9mm, 2.3mm
  • Curve installation
  • Up to 7680Hz super high refresh rate
  • Support 3D XR wall

Brick Series P2.5 LED Display For Indoor

Features:

  • Flexible screen size: Standard panel size: 500×1000 mm / 500×250 mm
  • Full range of pixel pitch:1.5mm / 1.8mm,2.6mm / 2.9mm / 3.9mm
  • 100% front service, bracket free
  • Smart mechanical design
  • Creative shapes

GOB P2.5 LED Display For Outdoor

Features:

  • Pixel pitch: 1.5mm, 1.8mm, 2.5mm
  • GOB Technology Outdoor
  • 5000:1 high contrast ratio
  • 100% front service

Conclusion:

 

The above is a guide about what is a P2.5 LED display. P2.5 LED displays are commonly used for indoor applications, but with the advancement of technology, the demand for outdoor high-definition displays has increased. Doit Vision have also developed GOB P2.5 LED displays for outdoor use. We hope this technical knowledge will help you. If you want to buy LED display screens, you can directly contact us.

 











Source link